Basis
Pronis was established on the basis that it will offer solutions in all aspects of security systems as a "Solution Finder" to achieve maximum results.

To offer a solution is not only to solve a problem but at the same time to take precautions to avoid future problems by analysing the whole structure in the most beginning. This is a special feature which is gained by not only knowledge but also a whole rich experience (a "know-how" basis).

It is very important to be able to offer customized solutions in security and automation systems which are known to be as vital now. The reason is that a different configuration is needed for every project/application and it is crucial to obey the "Protect life, environment and valuable equipment" rule while producing solutions for each configuration.

Purpose
Our purpose is to develop technological and scientific solutions in all fire and security systems, complying with local regulations as well as in accordance with international standards (EN54, NFPA72, NPB¹⁾) using equipment which is accepted by at least one of the international authorities.

¹⁾ Fire Safety Norms (NPB = Normi Pozharnoi Bezopasnosti, Russian Federation)

Method
You do not have a fire alarm system just spreading some detectors around in a building nor you have an intrusion system by mounting a magnetic contact and an infrared detector. The site to be protected should be inspected using risk analysis method initially. Thus, all zones in a site could be classified according to its own danger risk percent. Only after this can be determined cautions which should be taken upon a danger signal (eg. For a fire detection system - depending on the site - horn or public announce is activated, all air handling units (AHU) are deactivated, pressurization fans (PF) are activated, lifts go down to ground floor and lift cabin remains open waiting for action by the fire brigade etc.).  As a result, system design should be done according to local regulations and in compliance with international standards.

Future problems should also be taken into account during design phase. As an example, if an air sampling smoke detection system (ASD) is to be designed for a location where there is too much vapor and machine oil produced eventually (as in production plants), there is potentially a risk for pipe holes to be blocked after some time.

Consequence
We care for every living thing, nature and valuable equipment. That's why we offer solutions initially.